LPZ-127
Woven Wire Mesh Pattern
The Banker Wire LPZ-127 is a 3/8" x 3/4" Opg .120 woven wire mesh specification. This rectangular weave can be woven in a variety of alloys including: Aluminum, Brass, Bronze, Copper, Galfan, Plain Steel, Pre-Galvanized Steel, Stainless Steel, Weathering Steel.
Pattern Details
Percent Open:65.3%
Overall Thickness:.240
Crimp Style: LCPLZ
Aspect Ratio: 1.75:1
Opening Limitation: .375
Weight: 1.54 lbs./sq. ft.
![LPZ-127](https://cdn.bankerwire.com/uploads/2019/09/LPZ-127_1000x500_Detail.jpg)
![ruler image](https://cdn.bankerwire.com/uploads/2020/06/ImageScaleRuler-for-1000x500-labeledB.png)
LPZ-127
![banker wire logo for our print page](https://cdn.bankerwire.com/uploads/2019/02/banker_logo_reduced-1.jpg)
![print ready image for LPZ-127](https://cdn.bankerwire.com/uploads/2019/09/LPZ-127_5x7.jpg)
![img b height marker](https://cdn.bankerwire.com/uploads/2019/09/new-arrow-b-1.png)
![img a height marker](https://cdn.bankerwire.com/uploads/2019/09/new-arrow-a-1.png)
Pattern Details
Percent Open:65.3%
Aspect Ratio:1.75:1
Weight:1.54 lbs./sq. ft.
Overall Thickness:.240
Crimp Style:LCPLZ
Opening Limitation:.375 in.
What are your dimensions?
We manufacture every job to size. List the dimensions and any addition details of your job.![special notes sections](https://cdn.bankerwire.com/uploads/2019/09/notes-section.jpg)
"Maximum" Dimensions of available raw material configurations
![printable material icon](https://cdn.bankerwire.com/uploads/2019/01/StainlessSteel_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/PlainSteel_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/WeatheringSteel_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/PreGalv_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/Galfan_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/Brass_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/Bronze_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/Copper_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/Aluminum_Icon2.png)
*Weight based on the specific density of mild (plain) steel **Maximum sphere diameter which will pass through opening Product specifications are subject to change. Product image is shown at 100% unless stated otherwise. For accuracy, specification sheet must be printed with no scaling. Measurements and data are approximate and should be confirmed with a physical sample.