LZ-111
Woven Wire Mesh Pattern
The Banker Wire LZ-111 is a 3/8" X 1" OPG .105 woven wire mesh specification. This rectangular weave can be woven in a variety of alloys including: Stainless Steel, Plain Steel, Weathering Steel, Pre-Galvanized Steel, Galfan, Aluminum, Bronze, Brass, Copper.
Pattern Details
Percent Open:70.7%
Overall Thickness:0.210
Crimp Style: LCLCZ
Aspect Ratio: 2.30:1
Opening Limitation: 0.375
Weight: 1.11 lbs./sq. ft.
![LZ-111](https://cdn.bankerwire.com/uploads/2019/02/lz-1111516050132.jpg)
![ruler image](https://cdn.bankerwire.com/uploads/2020/06/ImageScaleRuler-for-1000x500-labeledB.png)
LZ-111
![banker wire logo for our print page](https://cdn.bankerwire.com/uploads/2019/02/banker_logo_reduced-1.jpg)
![print ready image for LZ-111](https://cdn.bankerwire.com/uploads/2019/02/LZ-111_5x7.jpg)
![img b height marker](https://cdn.bankerwire.com/uploads/2019/09/new-arrow-b-1.png)
![img a height marker](https://cdn.bankerwire.com/uploads/2019/09/new-arrow-a-1.png)
Pattern Details
Percent Open:70.7%
Aspect Ratio:2.30:1
Weight:1.11 lbs./sq. ft.
Overall Thickness:0.210
Crimp Style:LCLCZ
Opening Limitation:0.375 in.
What are your dimensions?
We manufacture every job to size. List the dimensions and any addition details of your job.![special notes sections](https://cdn.bankerwire.com/uploads/2019/09/notes-section.jpg)
"Maximum" Dimensions of available raw material configurations
![printable material icon](https://cdn.bankerwire.com/uploads/2019/01/StainlessSteel_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/PlainSteel_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/WeatheringSteel_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/PreGalv_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/Galfan_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/Brass_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/Bronze_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/Copper_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/Aluminum_Icon2.png)
*Weight based on the specific density of mild (plain) steel **Maximum sphere diameter which will pass through opening Product specifications are subject to change. Product image is shown at 100% unless stated otherwise. For accuracy, specification sheet must be printed with no scaling. Measurements and data are approximate and should be confirmed with a physical sample.