WD-038
Welded Wire Mesh Pattern
The Banker Wire WD-038 is a 4" OPG .250 WELDED wire mesh specification. This square mesh can be welded in a variety of alloys including: Stainless Steel, Plain Steel, Weathering Steel, Pre-Galvanized Steel.
Pattern Details
Percent Open:88.6%
Overall Thickness:0.500
Crimp Style: WDWD
Aspect Ratio: 1.00:1
Opening Limitation: 4.000
Weight: 0.95 lbs./sq. ft.
![WD-038](https://cdn.bankerwire.com/uploads/2019/02/wd-0381483027505.jpg)
![ruler image](https://cdn.bankerwire.com/uploads/2020/06/ImageScaleRuler-for-1000x500-labeledB.png)
Additional Images![WD-038 stainless steel welded wire mesh WD-038 stainless steel welded wire mesh](https://cdn.bankerwire.com/uploads/2015/11/WD-038_SS_2700x1600_002-scaled.jpg)
![WD-038 stainless welded wire mesh untrimmed WD-038 stainless welded wire mesh untrimmed](https://cdn.bankerwire.com/uploads/2015/11/WD-038_SS_2700x1600_001-scaled.jpg)
WD-038
![banker wire logo for our print page](https://cdn.bankerwire.com/uploads/2019/02/banker_logo_reduced-1.jpg)
![print ready image for WD-038](https://cdn.bankerwire.com/uploads/2019/02/WD-038_5inX7in.jpg)
![img b height marker](https://cdn.bankerwire.com/uploads/2019/09/new-arrow-b-1.png)
![img a height marker](https://cdn.bankerwire.com/uploads/2019/09/new-arrow-a-1.png)
Pattern Details
Percent Open:88.6%
Aspect Ratio:1.00:1
Weight:0.95 lbs./sq. ft.
Overall Thickness:0.500
Crimp Style:WDWD
Opening Limitation:4.000 in.
What are your dimensions?
We manufacture every job to size. List the dimensions and any addition details of your job.![special notes sections](https://cdn.bankerwire.com/uploads/2019/09/notes-section.jpg)
"Maximum" Dimensions of available raw material configurations
![printable material icon](https://cdn.bankerwire.com/uploads/2019/01/StainlessSteel_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/PlainSteel_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/WeatheringSteel_Icon2.png)
![printable material icon](https://cdn.bankerwire.com/uploads/1970/01/PreGalv_Icon2.png)
*Weight based on the specific density of mild (plain) steel **Maximum sphere diameter which will pass through opening Product specifications are subject to change. Product image is shown at 100% unless stated otherwise. For accuracy, specification sheet must be printed with no scaling. Measurements and data are approximate and should be confirmed with a physical sample.